[phenixbb] gap between Wilson B and average B

fn1 at rice.edu fn1 at rice.edu
Thu May 30 10:15:51 PDT 2013

Hi Pavel,

Thank you very much! I'll try it.

Quoting Pavel Afonine <pafonine at lbl.gov>:

> Hi Fengyun,
> thanks for sending me the files. I see you are using an ancient  
> version of Phenix (1.8_1069). With the latest version I get Wilson  
> B=106.87 and average B=110.40.
> Get the latest Phenix (dev-1389 or so) and that will fix the problem.
> Pavel
> On 5/30/13 9:04 AM, fn1 at rice.edu wrote:
>> Dear all,
>> I have a structure at about 3.5 A, which has a wilson B of about  
>> 109 and has an average B factor from model is only 49 (I did not  
>> use TLS).  I read from the previous posts that wilson B is  
>> sometimes smaller than average B, but in my case it is reversed. I  
>> look at the distribution of model B factors, they are in the range  
>> of 8 to 132. Is there any problem with the refinement of this  
>> structure? Thanks in advance for all advice!
>> Regards,
>> Fengyun
>> _______________________________________________
>> phenixbb mailing list
>> phenixbb at phenix-online.org
>> http://phenix-online.org/mailman/listinfo/phenixbb

More information about the phenixbb mailing list